Operating Instructions

Getting More Out of "Settings"

When activated, Auto-retry and a countdown timer to the next call

attempt will appear in the display. An auto-retry warning tone will

sound each time a new call attempt is made.

If the automatic redialling is successful proceed with the call as

normal. Pressing Exit or any key during the retrying process will

cancel auto-retry and end the dialling process for that call.

Auto Switch On/Off

This feature enables you to automatically program the phone to switch On

or Off at pre-determined times.

To set a Switch On or Off time,

At the switch-on time the phone comes on in the normal way. Enter the

lock or PIN code if required.

If the phone is already on at the switch-on time no action occurs.

If the phone is set to switch-off, the display will show a warning message

Switch-off in with a countdown timer showing the time to switch off.

Pressing Exit will cancel the switch off process.

If the mobile is already off at the switch-off time no action occurs.

Default (factory) settings

Use the Settings menu to return the phone settings back to the factory

settings. This has no effect on the phonebook entries or phone lock code.

Select Phone settings. Select Auto features.

Select Auto-retry.

Select On or Off.

Press Exit or to return to the standby display.

Press . Select Settings.

Select Phone settings. Select Auto features.

Select Auto-switch-off or Auto-switch-on.

Select On or Off.

(If a previous time has been entered it will be displayed)

Enter a new time or accept the previous one. Press OK .

Stored will briefly be displayed.

Press Exit or to return to the standby display.

The Auto Switch-off and Switch-on times cannot be the same. If a call is connected at the time of

switch-off, the switch-off process is postponed until the call is terminated.

Caution - Remember to turn off the Switch-on alarm feature

when boarding an aircraft where the use of mobile phones is not

permitted and is illegal. Alternatively you can remove the battery

after turning off the phone.

See the General safety warnings in First Steps with your Eclipse.

Press . Select Settings.