Operating Instructions

Turning on/off the voice mail alert tone

If you wish a tone to sound alerting you of the receipt of a voice mail message,

Calling the voice mail centre to check for messages

There are two ways:

• To dial the voice mail centre directly after the receipt of a message,

• Alternatively,

Dialling will proceed as for a normal call.

Phone settings

Keypad lock

When keypad lock is turned on it prevents accidental operation of the keys

and access into the menus. The key tones are also silenced and the back-

light is deactivated.

Keypad lock is suspended during incoming calls and resumed when the

call is terminated. Emergency calls can still be made. If a key is pressed the

display will give a reminder that keypad lock is on.

To turn the keypad lock on and off,

Language selection

All the display messages can be shown in several languages.

Select Number. When prompted enter the number manually or

from a stored memory.

Press OK to validate your entry.

Press Exit or to return to the standby display.

If you subscribe to the 'Line 2' service the voice mail centre number will need to be stored separa-

tely for that line. The voice mail number is automatically assigned to speed dial location number 1

(see Speed dialling on page 28).

Press . Select Settings.

Select Voice Mail.

Select Alert. Select On or Off.

Press Exit or to return to the standby display.

Press and hold down .

Press . Select Settings.

Select Voice Mail.

Select Call.

If a voice mail number has not been stored when Call is selected you will be asked to enter the

voice mail number. Proceed as described in Storing a voice mail centre number, page 25.

When the keypad is locked the backlight may be switched on by pressing the side shuttle key

downwards.

Press . Select Settings.

Select Phone settings. Select Keypad lock to turn keypad lock on.

To unlock the keypad, press Unlock then the key.