Operating Instructions

Getting More Out of "Calls & Times"

Setting the credit limit - in units or currency

After setting the currency and cost per unit, if required and available on

your subscription, you are also able to set a credit limit in units or an

amount in the currency of your choice. When the credit limit is reached

the phone will be prevented from making and receiving all chargeable

calls. This will not prevent the phone from making emergency calls.

Show costs

Call costs - resetting all costs to zero

To reset all the call costs to zero,

Select Units.

Press Exit or to return to the standby display.

When the cost type is set to units the credit limit and the remaining credit are shown in units.

Press . Select Calls & Times.

Select Call costs.

Select Credit Limit. The display will show the present credit

limit setting.

Press Edit . Enter the PIN 2 code and press OK .

Enter the credit limit (use to enter a decimal point). Press

OK to validate.

Press Exit or to return to the standby display.

When a credit limit is entered the selection from the 'Credit Limit' display will be Edit or Set No

Limit.

Press . Select Calls & Times.

Select Call costs.

Select Show.

Use or to display the cost of the Last Call, All Calls and

the Remaining credits.

Press Exit or to return to the standby display.

The remaining credit is shown in either units or currency as set by Cost Type menu above.

Press . Select Calls & Times.

Select Call costs.

Select Reset.

Select Yes to reset the costs or No to exit.

If Yes is selected, enter the PIN 2 number and press OK . All

Costs Reset will briefly be displayed.

Press Exit or to return to the standby display.