Operating Instructions

Basic operations

A WAP™ profile has to be selected for the preferred WAP™ access.

To select a WAP™ profile:

* GPRS availability is operator dependent

for the WAP™ gateway then press OK to validate.

Select Home page and edit a URL address, then press OK to

validate.

Select Activate security (Never, Automatic or Always

requested for secure transactions such as mobile banking), then

press Select to validate.

Select a Normal port corresponding to the connection or Secure

port for a secure connection, then press OK to validate.

Select Send Characteristics to send or not the UA profile, to

the remote server and press Select to validate. Press End .

Select Yes. Stored will appear.

Select Circuit access, and edit a Phone number to dial up the

WAP™, a Login name, used for identification (29 char. max.), a

character will turn into a star (*) after a short while), a Speed

(9600 or 14400 bps), a Mode for transmission (digital or analog)

to the remote modem, an Auto-disconnect duration (0 to

60minutes) for automatic disconnect after a defined time with

no activity on the WAP™ connection. Validate each entry by

pressing OK or Select . Press End . Select Yes. Stored

will appear.

Select Packets access*, and edit an Access point name from

the GPRS network (the name is picked from a list managed in the

mobile) and an Auto-disconnect duration.

Press OK , every time, to validate. Press End . Select Yes.

Stored will appear.

Select Connection mode and select the mode of connection:

Circuit, Packet* or Circuit+packet. Press Select to vali-

date. Press End . Select Yes. Stored will appear.

Select Push parameters and edit a Push Proxy SMS centre, a

Push Proxy SMS address or Push Proxy IP address by select-

ing from a predefined list (except IP address): press Names and

select an entry from the list and press OK to validate.

Press End . Stored will appear. Select Yes to store the new data

and press Select . The new profile appears in the profile list.

Press . Select Internet.

Select Profile list. Select the preferred profile and press

Options .

Select Select.

Up to 20 bookmarks can be stored for frequent access.