Operating Instructions

Voice Memo

The Eclipse mobile lets you to record one or several memos of up to 120 seconds

total. Each memo is a part of this stock of time, and may be of any duration, pro-

vided the global limit cannot exceed this limit of 120 seconds.

To record a voice memo or a phone conversation,

To listen to the voice memo,

To erase a memo,

WAP™

Either your phone is pre-programmed with the settings or you must enter them.

See below to enter the settings. If you cannot access the settings, they are pre-pro-

grammed.

Storing/editing the connection settings

(obtainable from your network operator or any WAP™ portal)

To create a new profile (up to 10 profiles can be stored):

Press and hold .

A beep will sound and the display will show the recording time left.

The recording will then start.

A second beep will sound if the end of the recording time has

been reached.

Press Stop or to end the recording.

If the memory is nearly full when starting a new recording you are asked to erase the previously

recorded voice memo.

Select Yes to do so and proceed as for point 2 in the previous item.

Select No if you do not wish to delete the previously recorded memo.

When dealing with a phone conversation you can only record one person at a time.

Press to play what has been recorded. The display will show

the remaining recorded time.

A beep will sound at the end of the memo.

Press Stop or to return to the standby display.

You can stop the memo playback at any time by pressing Stop.

Press Erase during memo playback or recording.

Select Yes to confirm your choice. Confirmation will be displayed.

Press Exit to return to the standby display.

Press . Select Internet.

Select Profile list. Choose an empty profile ([...]) and select

New .

Edit a profile name then press OK to validate. Stored will

appear. After a while, the menu associated with the new profile

name is displayed.

Select Gateway settings, and edit an IP address (mandatory)