Operating Instructions

Basic operations
21
There are two methods of entering text characters and numbers in the display. The
Multitap or Multipress key method and the quicker intuitive method, called T9 text
input, which involves fewer key presses than the multitap method.
T9 ( ) text entry
A press on will swap between T9 text entry and the Multitap method.
To enter text with T9:
Tips and Operation
Example
To enter card in the display:
• Press and select Messages.
• Select Write new.
• Press , appears.
• Press , a appears.
• Press , ca appears.
• Press , car appears.
• Press , case appears.
If the displayed word is not the one you want, press as many times as
necessary to view card.
• Press to exit from this example and return to the standby display.
The Multitap/Multipress method
This is the default method for "free text".
A press on will swap between T9 text entry and the Multitap method.
Press the key with the required letter once only.
Do not be put off if the character you want is not immediately
displayed.
The "active" word changes as you type, so type to the end of the
word.
If your word is not displayed, press for other matching words.
If your word is not recognised, press to swap to the multitap
method to complete the word.
Use or to locate the cursor in the text to insert characters
or make corrections.
Key Action
Long press Numbers
Shift - upper/lower case
Clear
Clear or backspace
Space
Another matching word
Smart punctuation
Swap between T9 and Multitap method
1
2
3
4
5