Operating Instructions

Volume adjustments

To individually adjust the volume level of the ring tone, key tones,

alarm tones and incoming audio from the stand-by display, press .

Alternatively, access Volume control from the Settings menu:

The display confirms the selection, naming the volume to be adjusted.

During a call, you can adjust the conversation volume by using or .

Ramping

Ramping causes the incoming ring tone to increase in increments to

the maximum volume level.

Melody composer

To compose your own melodies:

Use the actions in the following table to modify the notes. The tempo

Press . Select Settings.

Select Phone settings. Select Tones.

Select Volume.

Select Ring, Keys, Conversation or Alarm.

Use or to adjust the setting.

Press OK to validate the setting.

Press Exit or to return to the stand-by display.

If the ring tone volume level is set to 0 displays.

Press . Select Settings.

Select Phone settings. Select Tones.

Select Volume.

Select Ramping.

Select On or Off.

Press Exit or to return to the stand-by display.

When turned on the volume of the incoming ring tone starts from the minimum and rises to the

maximum volume until answered.

Press . Select Settings.

Select Phone settings. Select Tones.

Select Melody composer.

Select Edit.

Enter notes using the keypad (see table below):

Note C D E F G A B

Key

Select OK. The phone stores your melody

Select Play to play your melody or Delete to delete it.

Press Exit or to return to the stand-by display.