Operating Instructions

23
The menu
T9 text entry
Press to swap between T9 text entry and the Multitap method.
To enter text with T9:
Tips and operation
Example
To enter Card in the display:
• Press and select Messages.
• Select Write new.
• Press : appears.
• Press . A appears.
• Press . Ca appears.
• Press . Car appears.
• Press . Case appears.
If the displayed word is not the one you want, press as many times
as necessary to view Card.
• Press to exit from this example and return to the stand-by display.
Multitap text entry
Press on to swap between T9 text entry and the Multitap method.
To enter text with multitap:
Press the key with the required letter only once.
Do not be put off if the character you want is not immediately dis-
played.
The ‘active’ word changes as you type, so type to the end of the
word.
If your word is not displayed, press for other matching words.
If your word is not recognised, press to swap to the Multitap
method to complete the word.
Use or to locate the cursor in the text to insert characters or
make corrections.
Key Action
Shift - upper/lower case
Clear
Clear or backspace
Press and hold Numbers
Space
Another matching word
Smart punctuation
Swap between T9 and Multitap method
Press the key with the required letter. If it is not the first letter,
press key repeatedly until the letter appears. See the table that
follows for a key to character correspondence.
Enter the next character. If two characters are on the same key
wait for the display at the top of the screen to clear or press be-
fore pressing the same key again.
1
2
3
4
5
1
2