Operating Instructions

10
The phone rings and the call connects like a normal telephone. A call timer
appears.
You can also get the following messages if the call does not connect or you
use the second line:
If the dialled number matches one stored in the phone book then the name
of the called person appears in the display.
Receiving a call
The phone rings (or vibrates, see page 37 to set) when it receives a call. See
page 38 to set the incoming ring tone. See page 39 to set the backlight.
Answering the call
No ring
Pressing No ring stops the sound of the ring tone, which allows you to,
for example, go out of a room before pressing.
Service number presentation
If you have the service number presentation your phone displays the fol-
lowing information.
If you have a second line, appears if the call has been received on your
line 2 number (see page 20 for details).
Rejecting the call
To reject, or return a busy signal to the caller:
Ending a call
You can prefix international calls with 00 or +. To enter the + symbol before a number press
and hold down .
Your phone
displays...
if the...
Busy called party is engaged.
Not allowed
(fixed dialling)
number dialled is not authorised by the FDN list (see
page 28).
call is made using the second line (see page 36).
Press .
If the ring tone volume is set to zero (off) or if the phone has been set to 'Vibrate' mode, no audi-
ble sound is heard.
Your phone displays... if the number is...
Unknown number, then Call1
when connected
unavailable.
the caller’s number available but not in phone books.
Withheld number, then Call1
when connected
withheld.
Press .
Press . The call timer stops and disappears.