Indoor Installation Manual

Table Of Contents

⑤ Electrical Knockouts

⑧ Auxiliary Drain Pan

⑨ Primary Drain 3/4" FPT

⑩ Airflow

Horizontal Right

Fan assembly rotation not required

10.3. Horizontal left installations

For horizontal left installation, the drain pan will need to be moved to the opposite side of the coil. This can

be done by moving the two brackets and drain pan to the left of the coil. This way, the condensate that

formed on the coil will fall into the drain pan. Also, the appropriate knockouts for the drains will need to be

removed once the drain pan is in its correct position. In addition to relocating the side drain pan, the fan

assembly will also need to be removed rotated 180°, and reinstalled. The motor has to be closest to the

ground. The two clear plastic tubes included in the accessory bag will also need to be attached to the top

drain pan. See instructions below.

Directions for rotating fan for Horizontal Left Installation:

SCALE 0.125

Step. 1 Remove the panel marked “FILTER”.

SVZ-KP12,18, 24, 30, 36NA

ENGLISH