Indoor Installation Manual

Table Of Contents

5. Selecting an installation site

• Avoid locations exposed to outside air.

• Select a location free of obstructions to the airflow in and out of the unit.

• Avoid locations exposed to steam or vapor.

• Avoid locations where combustible gas may leak, settle, or be generated.

• Avoid installation near machines emitting high-frequency waves (high frequency welders, etc.).

• Avoid locations where the airflow is directed at a fire alarm sensor. (Hot air could trigger the alarm during

operation.)

• Avoid places where acidic solutions are frequently used.

• Avoid places where sulphur-based or other sprays are commonly used.

• When the air handler is installed in the horizontal position please install a drain pan under entire cabinet.

• Install sufficient thermal insulation to prevent condensation from forming on the outlet and inlet ducts.

SVZ-KP12,18, 24, 30, 36NA

ENGLISH