Submittal

ManualsBrandsMitsubishi ManualsCooling18k BTU Cooling + Heating - M-Series H2i Multi-Position Air Handler Air Conditioning System - 18.4 SEER

Table Of Contents

Job Name:

System Reference: Date:

Indoor Unit:

SVZ-KP18NA

Outdoor Unit:

SUZ-KA18NAHZ

INDOOR UNIT FEATURES

• Ducted air handler provides a solution to cool and heat larger zones

• Highly efficient completely enclosed EC motor

• Selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting

• 1 inch R4.2 fiberglass free insulation reduces condensation and increases efficiency

• Positive pressure cabinet with air leakage of less than 2.0% at 1.0 in. w.g. (Tested per ASHRAE Standard 193)

• Unique blow through design allows simple coil cleaning when the blower is removed

• Multi-position installation: horizontal (left or right), vertical (upflow)

• Optional electric heat kit for additional heating capacity

• Built-in humidifier control, ERV control and auxiliary heat control

• Optional downflow kit

OUTDOOR UNIT FEATURES

• The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns

• INVERTER-driven compressor and LEV provide high efficiency and comfort while using only the energy needed to maintain maximum performance

• H2i

hyper heat performance offers 100% heating capacity at 5°F and greater than 76% heating capacity at -13°F

• Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle

• Quiet operation

• Blue Fin anti-corrosion treatment applied to the outdoor unit heat exchanger for increased coil protection and longer life

• Built-in base pan heater

• Innovative Joint Lap DC Motor leads to high efficiency and reliability

• Pulse Amplitude Modulation technology

SUBMITTAL DATA: SVZ-KP18NA & SUZ-KA18NAHZ

18,000 BTU/H AIR HANDLER HEAT PUMP SYSTEMS

M-SERIES

Summary of content (8 pages)

PAGE 1
M-SERIES SUBMITTAL DATA: SVZ-KP18NA & SUZ-KA18NAHZ 18,000 BTU/H AIR HANDLER HEAT PUMP SYSTEMS Job Name: System Reference: Indoor Unit: SVZ-KP18NA Date: Outdoor Unit: SUZ-KA18NAHZ INDOOR UNIT FEATURES • Ducted air handler provides a solution to cool and heat larger zones • Highly efficient completely enclosed EC motor • Selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting • 1 inch R4.
PAGE 2
SPECIFICATIONS: SVZ-KP18NA & SUZ-KA18NAHZ Cooling at 95°F1 Maximum Capacity BTU/H 18,000 Rated Capacity BTU/H 18,000 Minimum Capacity BTU/H 9,360 Maximum Power Input W 1,440 Rated Power Input W 1,440 Moisture Removal Pints/h 1.10 Sensible Heat Factor 0.
PAGE 3
SPECIFICATIONS: SVZ-KP18NA & SUZ-KA18NAHZ Sound Pressure Level (Heating) dB(A) 41-36-33 External Static Pressure in.WG 0.30-0.50-0.80 In. (mm) 3/4 (19) Drain Pipe Size Heat Exchanger Type Plate fin coil External Finish Color Black W: In. (mm) 17 (432) D: In. (mm) 21-5/8 (549) H: In. (mm) 39-13/16 (1,011) W: In. (mm) 18 (460) D: In. (mm) 28-3/4 (730) H: In. (mm) 44-3/8 (1,130) Unit Weight Lbs. (kg) 93 (42) Package Weight Lbs.
PAGE 4
SPECIFICATIONS: SVZ-KP18NA & SUZ-KA18NAHZ Outdoor Unit Operating Temperature Range Refrigerant Piping Cooling Air Temp (Maximum / Minimum)* °F 115 / 14 Cooling Thermal Lock-out / Re-start Temperatures** °F 1/5 Heating Air Temp (Maximum / Minimum) °F 75 / -13 Heating Thermal Lock-out / Re-start Temperatures** °F -18 / -14 Type R410A Charge Lbs, oz 3, 12 Gas Pipe Size O.D. (Flared) In.(mm) 1/2 (12.7) Liquid Pipe Size O.D. (Flared) In.(mm) 1/4 (6.35) Maximum Piping Length Ft.
PAGE 5
ACCESSORIES: SVZ-KP18NA Wireless Signal Receiver □ PAR-FA32MA-W Wireless Signal Receiver □ PAR-FA32MA-E Wireless Remote Controller □ PAR-FL32MA-E kumo touch™ RedLINK™ Wireless Controller □ MHK2 Deluxe MA Remote Controller □ PAR-40MAAU Simple MA Controller □ PAC-YT53CRAU-J Touch MA Controller □ PAR-CT01MAU-SB Airzone ZBS Wired Blueface Principal Controller White □ AZZBSBLUEFACECB Airzone ZBS Wired Think Controller White □ AZZBSTHINKCB Airzone ZBS Wireless Think Controller White □ AZZBSTHIN
PAGE 6
ACCESSORIES: SUZ-KA18NAHZ Air Outlet Guide □ MAC-886SG-E Optional Defrost Heater □ MAC-642BH-U1 Hail Guard □ HG-A7 Outdoor Unit 3-1/4 inch Mounting Base (Pair) - Plastic □ DSD-400P Condensing Unit Mounting Pad 16" x 36" x 3" □ ULTRILITE1 Outdoor Unit Stand — 12" High □ QSMS1201M Outdoor Unit Stand — 18" High □ QSMS1801M Outdoor Unit Stand — 24" High □ QSMS2401M Heavy Duty Wall Mounting Bracket— Coated Steel □ QSWB2000M-1 Heavy Duty Wall Mounting Bracket — 316 Series Stainless Steel □ QSWB
PAGE 7
DIMENSIONS: SVZ-KP18NA Unit:mm(in.) Top view ø26 Knockout Hole ø26 Knockout Hole for electrical heat wiring Note: Electrical entrance for SVZ located on both left and right side of the cabinet. See right or Left side view for knockout locations. 2-ø4.6 Burring Holes for electric heat installation 1 2 Refrigerant piping flare connection(gas) Refrigerant piping flare connection(liquid) B(Duct) Secondary drain pipe (Emergency draining) ø19.
PAGE 8
DIMENSIONS: SUZ-KA18NAHZ Unit: inch Clear *1 REQUIRED SPACE *1 20 in. (500 mm) or more when front and sides of the unit are clear 16-7/16 Drain hole 1-9/16 2 13 m 00 . (1 4 in more or 1-5/8 4i or mn. (10 ore 0 mm ) m) 14-3/16 Air in Air in Air out 2-holes 13/32 13/16 6-7/8 19-11/16 ) mm 500 ( . 2 in 20 ore * or m 14 or min.