User`s manual

–8–
Aim the remote control at the air-conditioner.
Press the ON/OFF button.
When the unit is not in AUTO mode:
Press MODE button.
Move the [ mark] to the (Auto) position.
Temperature adjustment during AUTO
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button.
1
AUTO mode operation procedure
■ Automatically selects the operation mode (HEAT, DRY, COOL) depending on the room temperature when switched on.
2
NOTE
WARM
Press the
button.
COOL
Press the
button.
1
When a change in temperature is desired.
Press the or button.
• If you don’t want the AUTO mode program, change to
HEAT, DRY or COOL instead of AUTO.
Page 9
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
To stop: Press the ON/OFF button.
■ Each time the
button is pushed, the switch over occurs in the following order –6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicatored, even if the
button is pushed, the indicator does not change.
■ Each time the
button is pushed, the switch over occurs in the following order +6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicatored, even if the
button is pushed, the indicator does not change.
• Air is not blown out during the op-
eration.
Page 17
• Simultaneous automatic operation.
Page 16
RJD012A110_Eng 10/27/05, 1:15 PM8
Black