Specifications

68
SRK-H
FAN SPEED button
Each time the button is pushed, the •
indicator is switched over in turn.
OPERATION MOOD select button
Each time the button is pushed, the •
indicator is switched over in turn.
ON/OFF button
Press for starting operation, press again
for stopping.
AIRFLOW button
This button changes the flap mode.
When pressed, this button changes
the mode in the following order:
TIMER button
RESET switch
Switch for resetting microcomputer.
or
no indication
(SWING STOPPED)
(AUTO) (SWING)
TEMPERATURE button
This button sets the room temperature.
SET TIMER button
This button sets the ON timer and OFF
timer times.
TEMPERATURE Indicator
Indicates set temperature.
(Does not indicate temperature when
operation mode is on AUTO)
RUN (HOT KEEP) light (green)
• Illuminates during operation.
•Blinks at air flow stop due to the ‘HOT
KEEP’.
FAN SPEED Indicator
Unit indication section
Indicates set air flow rate with • lamp.
AIR FLOW Indicator
TIMER Indicator
SRK408HENF
Shows selected flap mode.
TIMER light (yellow)
Illuminates during TIMER operation.
OPERATION MODE Indicator
Indicates selected operation with • lamp.
(AUTO) · (Cool) · (Heat) · (Dry)
• The above illustration shows all controls, but
in practice only the relevant parts are shown.
CONT
ON OFF TIMER
FAN / SPEED ON / OFF MODE
TEMP AIR FLOW
SET TIMER TIMER
ACL
AUTO
HI
MED
LO
CONT
ON OFF TIMER
AUTO
HI
MED
LO
TIMER RUN
This button changes the selection of
ON timer/OFF timer operation and
normal operation.
S Indication section
(4) Operation control function by remote control switch
¡ 32, 40 models
Remote control switch
S Operation section