Specifications

CHAPTER 3 INSTALLATION

3.4 Installation

The control unit with display and each unit are installed in a sealed structure cabinet as a principle.

Observe the following points when installing into the cabinet.

3.4.1 Installation of Control Unit with Display

(1) To stably operate the hard disk drive, install the control unit with display vertically.

(2) Secure the space shown below for ventilation in consideration of the control unit's heat dissipation

and wiring.

(3) When using the PCMCIA option, provide sufficient wiring allowance at the top of the control unit to

wire the Ethernet communication cable and SCSI cable.

(Top)

(Bottom)

50mm or more

Control unit

Display unit

Display section

15mm or more

(heat dissipation,

ventilation)

150mm or more

(allowance for

heat dissipation

and wiring)

Operation pendant

Front surface

80mm or more

when the expansion

card is mounted

(allowance for wiring)