Installation manual

–33–
When you select “Valid” for
the Individual Lock/Unlock on
the Function Setting screen,
the function of permitting and
prohibiting the individual
operation of the remote
controller do not work.
In case that operating
condition of a part or all of air
conditioners which are set to
a group, does not display.
The screen of this central
control is not returned to
normal display even if you
press the reset switch.
This function can be applied to the indoor units, which are the model KXE4 or later, and to the remote
controller, which is the model RC-E1 or later.
Make sure to select “Invalid” for the Individual Lock/Unlock on the Function setting screen.
There may be inadequacy for communication line or the setting of this center console.
Please contact the shop where the unit was purchased.
This may possible that the central control or power system has malfunction.
Please contact the shop where the unit was purchased.
Caution that performing of the monthly calculation (SC-SL3N-BE only)
• We will consult about the compensation when the monthly calculation was not possible by the trouble of this
central control within the limits of this central control purchased amount. Please understand that we do not
compensate for the expense more than the purchased amount.
• Because the monthly calculation by this data does not conform to OIML, we cannot apply to public business.
• Please prepare the PC, spreadsheet such as EXCEL, a printer, a voltmeter, the gas flow meter that are
required for calculation.