Installation manual

–20–
Schedule Settings
Operating schedules can be set in group units. Sixteen schedules per day can be registered for operating time (in
minutes), run/stop, mode, prohibiting remote controller operations and temperature setting.
Set the detailed daily schedule (weekday, holiday, special 1, special 2) in advance.
Page 21
1. Press the SCHEDULE SETTING button on the MAIN MENU.
Page 7
The SCHEDULE SETTING screen is displayed.
■ Setting the current day’s schedule
The operating schedule for the current day is set on each group.
2. Press the TODAY’S SCHEDULE button on the SCHEDULE SETTING screen.
2
3
4
4
5
2. Press the button for item to set or change.
· Run/Stop: Press the RUN or STOP button.
With the RUN button, running starts, and with the STOP button, running stops.
·Temperature setting: Press ▲ or ▼.
Set a temperature between 18 and 30°C.
· Mode: Select
Auto, Cool, Dry, Fan or Heat by pressing the button.
* Auto mode can be enabled in the Function Settings.
Page 27
· LOCK: Press
or .
If
is pressed, remote controller operations are permitted, and if is pressed, they are
prohibited.
· Fan speed: select Hi, Me or Lo, and press the button.
· Air direction: select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.
· FILTER: if the reset button is pressed, the filter sign turns off.
3. Press the SET button. Press the Yes button on the confirmation screen.
When you do not want to set, press the No button.
Note
• If the BACK button is pressed, it returns to the previous screen.
• If individual lock/unlock is enabled in the Function Setting, it is possible to set the remote controller opera-
tions to permit or prohibit each item such as run/stop, mode and temperature setting.
• When individual lock/unlock are enabled in the Function Setting, remote controller operations are prohib-
ited if run/stop, mode and temperature setting are all
. (Some functions, such as reset of the filter sign
have been permitted.)