Installation manual

–19–

5. Press the button for the item to set or change.

· Run/Stop: Press the RUN or STOP button.

With the RUN button, running starts, and with the STOP button, running stops.

·Temperature setting: Press ▲ or ▼.

Set a temperature between 18 and 30°C.

· Mode: Select

Auto, Cool, Dry, Fan or Heat by pressing the button.

* Auto mode can be enabled in the Function Settings.

Page 27

· LOCK: Press

or .

is pressed, remote controller operations are permitted, and if is pressed, they are

prohibited.

· Fan speed: select Hi, Me or Lo, and press the button.

· Air direction: select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.

· FILTER: if the reset button is pressed, the filter sign turns off.

6. Press the SET button. Press the Yes button on the confirmation screen.

When you do not want to set, press the No button.

Note

• If the BACK button is pressed, it returns to the previous screen.

• If individual lock/unlock is enabled in the Function Setting, it is possible to set the remote controller opera-

tions to permit or prohibit each item such as run/stop, mode and temperature setting.

• When individual lock/unlock are enabled in the Function Setting, remote controller operations are prohib-

ited if run/stop, mode and temperature setting are all

. (Some functions, such as reset of the filter sign

have been permitted.)

[Individual lock/unlock settings enabled in Function

Setting]

This function can be applied to the indoor units,

which are the model KXE4 or later, and to the

remote controller, which is the model RC-E1 or

later.

Group Batch Operation

This section shows how to set or change the detailed setting of Batch Operation.

Set the groups for batch operation in advance.

Page 111, 1256

1. Press the CHANGE ALL button on the MAIN MENU.

Page 7

The CHANGE ALL screen is displayed.

Note

When the screen changes, no items are selected (the temperature setting is blank). Set only the items that

are to be set or changed.