Installation manual

–16–
5
6
6
5
5. Press the button for the item to set or change.
· Run/Stop: Press the RUN or STOP button.
With the RUN button is selected, the operation starts, and with the STOP button is selected,
the operation stops.
·Temperature setting: press ▲ or ▼.
Set a temperature between 18°C and 30°C.
· Mode: select
Auto, Cool, Dry, Fan or Heat by pressing the button.
* Auto Mode can be enabled in the Function Settings.
Page 27
· Fan speed: select Hi, Me or Lo, and press the button.
· Air direction: select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.
6. Press the SET button. Press the Yes button on the confirmation screen.
When you do not want to make the setting or change, press the No button.
■ Settings/changes on the detailed group settings screen.
Prohibiting operations by remote controller settings and filter resets can be carried out on this screen.
Press the DETAIL SET button on the BASIC GROUP SETTINGS screen.
Above
The DETAILS GROUP SETTINGS screen is displayed.
[BASIC GROUP SETTINGS screen]
[DETAILS GROUP SETTINGS screen]
5. Press the button for the item to set or change.
· Run/stop, temperature setting and mode are the same as the BASIC GROUP SETTINGS screen.
· LOCK: Press
or .
If
is pressed, remote controller operations are permitted, and if is pressed, they are
prohibited.
· FILTER: if the reset button is pressed, the filter sign turns off.
6. Press the SET button. Press the Yes button on the confirmation screen.
When you do not want to set or change, press the No button.
Note
• If the BACK button is pressed, it returns to the previous screen.
• If individual lock/unlock is enabled in the Function Setting, it is possible to set the remote controller opera-
tions to permit or prohibit each item such as run/stop, mode and temperature setting.
• When individual lock/unlock are enabled in the Function Setting, remote controller operations are prohib-
ited if run/stop, mode and temperature setting are all
. (Some functions, such as reset of the filter sign
have been permitted.)
[Individual lock / unlock settings
enabled in Function Setting]
This function can be applied to the indoor units,
which are the model KXE4 or later, and to the
remote controller, which is the model RC-E1 or
later.
[Auto button enabled in Function
Setting]
This function can be applied to the outdoor units,
which are the cooling / heating free multi KXR,
GHP-R series or later and PAC.