User`s manual

– 5 –
REMOTE CONTROL OPERATION ENABLE / DISABLE display
Displays items for which remote control operation is disabled.
HOLIDAY SET display
Displayed when a program for holidays is set.
INVALID INPUT display
Displayed when a button input is invalid.
FAN SPEED display
Displays the fan speed.
MAINTENANCE display
Displayed when there is a managed unit requiring a check.
PROGRAM CONFIRM display
Displayed when a set program is displayed.
CHECK display
Displayed when there is a unit being managed in which an error has occurred.
CLEAN FILTER display
Displayed when there is a unit being managed
whose filter needs to be cleaned.
ROOM TEMPERATURE display
Displays the room temperature.
OUTDOOR UNIT No. display
Displays the outdoor unit number in the ROOM
TEMPERATURE display section.
MANAG. UNIT NUM display
Displays the number of units managed in the
SET TEMPERATURE display section.
SET TEMPERATURE display
Displays the set temperature.
LOUVER display
Displays the louver direction.
TIMER INPUT display
Displayed when an external timer is being input.
RUN button
This button runs indoor units.
STOP button
This button stops indoor units.
CHECK button
This button is for service.
During normal operation, do not press this button.
FILTER RESET button
This button resets the CLEAN FILTER display.
Press this button after cleaning the air filter.
TEMP (
or ) button
This button sets the temperature.
LOUVER button
This button adjusts the louver direction.
TIMER INPUT SET button
This button sets an indoor unit for which operation by external timer is enabled.