User`s manual

– 25 –

3. Press the SELECT ( or ) button or a GROUP No. button to select the group number to be set.

To select all the groups, select “88”.

4. Press the SET button.

The group number is decided.

5. Press the SELECT ( or ) button to select the day of the week.

Align the

mark on top of the days of the week with the day of the week to be programmed as a holiday. If

you press

, the mark moves to the right while ﬂashing. If you press , the mark moves to the left.

6. Press the SET button.

The day of the week to be set as a holiday is decided. ( ) of the holiday lights up and the display becomes as

follows.

Note

To set multiples days of the week as holidays, repeat Steps 5 to 6.

To set the next group as a holiday, in the state of Step

5, press a group number button or RESET button to return

to the state of Step

3. Repeat Steps 3 to 6.

To end settings or to cancel a setting that is underway, press the MENU button.

Z Releasing a Holiday Setting

2, 4, 6

3, 5

1. Press the MENU button and select .

Each time you press this button, the display moves to the next step in the sequence in the diagram below.

The ﬂashes.

•

Off