User`s manual

– 9 –
How to Make Settings for One Unit
When managing an indoor unit with this central control without registering in any group, you can set individual
unit management with the operations below.
2, 5, 7
3
4, 6
1
1. Press the MENU button and select .
Each time you press this button, the display moves to the next step in the sequence in the diagram below.
The flashes.
2. Press the SET button.
The
lights up and “01-00” flashes.
3 . Press the RESET button.
The GROUP No. display section flashes “--”.
Example: “-- - 00”
4. Press the SELECT ( or ) button to set the indoor unit number.
The selected unit number flashes.
Example: “-- - 05”
5. Press the SET button.
“- -” and the indoor unit number light up and after 2 seconds, flash.
The displayed unit number is now registered for individual management. If you register a unit number that had
not been registered before this, the number of managed units increases.
Off