Specifications

-
22
-
’13 • SC-T-192
Step 2: Set the Meter Group Definition
SL3N-BE Utility memorizes the Meter Group Definition last time, and reads it when starting. You may skip this menu, as
long as there is no change.
Meter Group Definition defines to which energy system (electricity or gas) the air conditioner belongs.
It is possible to assign two or more meter numbers to one air conditioner's indoor unit. It can apply, when measuring an
outdoor unit and each indoor unit with another watt-hour meter. In this case, assign meter number of an outdoor unit to
indoor units.
In case of the previous Super Link system, “Unit No.” shows the “Super Link” communication line number (1 - 3) and the
indoor unit number (00-47).
Input the meter number (1 - 8) without a space into “Meter No.” column.
Fig.10 Meter Group Definition screen
[New]: Push this button when you make a new definition file.
[Open]: Push this button when the definition file already exists.
[Save]: Push this button when you want to save the current setting.
[Prev]: returns to the previous SL page. Three pages of SL1 - 3 exist in this screen.
[Next]: returns to the next SL page.
[Back]: returns to the Main Menu screen.
Caution
Setting of this screen is important when carrying out distribution calculation of the appropriate energy consumption.
It is necessary to tie in setting with an actual installation situation. Please ask your installation contractor about setting.