User`s guide

Getting Started
Enough of the fine print on USB devices. Let’s start communicating with your
device. The first step when trying to setup a new serial device in DAQFactory is to
initialize and test the communications. To do this, we’ll create a new
communications port and use the DAQFactory monitor window to talk to it.
1) Start DAQFactory, or go File-New if you have already started DAQFactory.
2) Select Quick – Device Configuration from the DAQFactory main menu, then
select New Serial / Ethernet Device. This will open up the serial device
configuration window. For now we’ll ignore most of it since we just want to talk to
our device a little.
3) Click on either New Serial or New Ethernet depending on how you device
connects to your PC.