Hardware manual

Chapter 2 Connection to a PLC
2-4
3.4.1 PLC Link Unit Settings....................................................................................2-101
3.4.2 CPU Unit RS-232C Link I/F Settings .............................................................2-102
3.4.3 CPU Unit RS-232C Link I/F Settings (CS1 Series)........................................2-103
3.4.4 C200Hα (Communication Board) Settings......................................................2-104
3.4.5 CS1 Series (Communication Board) Settings .................................................2-105
3.4.6 CPU Direct Settings (CPM1/CPM1A/CPM2A) ...............................................2-106
3.5 Usable Devices.........................................................................................................2-107
3.5.1 SYSMAC-C (when the PLC type setting is SYSMAC C Series) ....................2-107
3.5.2 CS1 Series (when the PLC type setting is SYSMAC CS1 Series) .................2-108
4 Allen-Bradley PLCs ................................................................................2-110
4.1 Connection Table ..................................................................................................... 2-110
4.1.1 Compatible PLCs .............................................................................................. 2-110
4.2 System Configuration.............................................................................................. 2-113
4.2.1 SLC 500 (connected to the CPU Channel 0 serial port) ................................. 2-113
4.2.2 PLC-5 (Interface Module)................................................................................. 2-113
4.2.3 PLC-5 (CPU Direct) .......................................................................................... 2-113
4.2.4 MicroLogix 1000/1100/1200/1500 (Mini Din connector on CPU Unit) .......... 2-114
4.2.5 MicroLogix 1500 (D-sub 9 Pin connector on CPU Unit)................................. 2-114
4.2.6 Ethernet/IP (MicroLogix, PLC-5, SLC 500, ControlLogix, CompactLogix) .. 2-115
4.3 Connection Diagram................................................................................................ 2-116
Connection Diagram 4-1: SLC 500 (RS-232C) to MICRO/I..................................... 2-116
Connection Diagram 4-2: Interface Module (RS-232C) to MICRO/I and PLC-5
(RS-232-C) to MICRO/I.............................................................................................. 2-117
Connection Diagram 4-3: Interface Module (RS-422) to MICRO/I......................... 2-117
Connection Diagram 4-4: PLC-5 (RS-422) to MICRO/I........................................... 2-118
Connection Diagram 4-5: MicroLogix 1000/1200/1500(Mini Din connector) to
MICRO/I ..................................................................................................................... 2-119
Connection Diagram 4-5: MicroLogix 1500(D-sub 9 Pin connector) to MICRO/I.. 2-119
Connection Diagram 4-7: ControlLogix/CompactLogix/FlexLogix
－
MICRO/I ..2-120
Connection Diagram 4-8: MicroLogix 1100(Mini Din connector) to MICRO/I.......2-120
4.4 Environment Settings .............................................................................................2-121
4.4.1 MicroLogix, SLC 500 (Full Duplex) .................................................................2-121
4.4.2 SLC 500 (Half Duplex)......................................................................................2-122
4.4.3 PLC-5 .................................................................................................................2-123
4.4.4 Ethernet/IP (ControlLogix, CompactLogix, PLC-5, SLC 500, MicroLogix ) .2-124
4.4.5 ControlLogix, CompactLogix, FlexLogix .........................................................2-125
4.5 Compatible Devices .................................................................................................2-126