Hardware manual

Chapter2 Connection to a PLC
2-346
21.3 Connection Diagram
The connector types given in the Connection Diagrams are for the unit and not the cable.
For details regarding wiring, refer to "3 Important Points Regarding About Wiring" in
Chapter 1.
Connection Diagram 21-1: MASTER-K K10S1 (Loader Port)
－
MICRO/I
PLC(RS-232C) HG1F/2F/2S/3F/4F(RS-232C)
Pin No.
Pin No.
Name Name
HG1F
Connector
HG2F/
3F/4F
HG2S
1 NC FG 1 1 1
2 RD SD 2 2 30
3 SD RD 3 3 32
4 NC RS 9 4 34
5 SG CS 6 5 36
6 NC NC -
６
-
SG 7 7 29
NC - 8 -
ER - 20 -
D-sub, 9P connector socket type (HG1F)
D-sub, 25P connector socket type (HG2F/3F/4F)
D-sub, 37P connector plug type (HG2S)
Mini Din 6Pin
Shield Wire
Connection Diagram 21-2: MASTER-K K80S, 120S, 200S (Loader Port)
－
MICRO/I
PLC(RS-232C) HG1F/2F/2S/3F/4F(RS-232C)
Pin No.
Pin No.
Name Name
HG1F
Connector
HG2F/
3F/4F
HG2S
1 5V FG 1 1 1
2 RXD1 SD 2 2 30
3 TXD1 RD 3 3 32
4 RXD2 RS 9 4 34
5 SG CS 6 5 36
6 5V NC -
６
-
7 TXD2 SG 7 7 29
8 SG NC - 8 -
9 SG ER - 20 -
D-sub, 9P connector socket type (HG1F)
D-sub, 25P connector socket type (HG2F/3F/4F)
D-sub, 37P connector plug type (HG2S)
D-sub, 25P connector plug type
Shield Wire