Hardware manual

Chapter2 Connection to a PLC
2-340
20.4 Environment Settings
Refer to the followings to configure the communication port between PLC (PROSEC T Series or
V Series) and MICRO/I.
Attend to the limitation of the configuration. It depends on the CPU unit and Link unit.
20.4.1 Toshiba PROSEC T Series, V Series
Items Details
Interface RS-232C RS-485(4wire/2wire)
Slave Number
01- 32
（DEC）
Baud Rate [bps] 1200, 2400, 4800, 9600, 19200, 38400, 57600 115200
Data Bits [bit] 7,8
Parity None/Odd/Even
Stop Bits [bit] 1, 2
Flow Control None/Hardware
Refer to the PROSC T Series and V Series user’s manual for the details of communication
setting.