Hardware manual

19 FUJI
2-325
Chap.2
19.4 Environment Settings
19.4.1 FUJI FLEX-PC (CPU)
19.4.1 FUJI FLEX-PC (CPU) to MICRO/I Setting
Items Details
Serial Interface RS-232C RS-485 (4wire)
Baud Rate (bps) 19200
Data Bits (bit) 8
Stop Bits (bit) 1
Parity Odd
Flow Control
Use the same
settings as for the
MICRO/I.
None
19.4.2 FUJI FLEX-PC (Link)
19.4.1 FUJI FLEX-PC (Link Module) to MICRO/I Setting
Items Details
Serial Interface RS-232C RS-485 (4wire)
Operation Modes (*1) Command-setting-type start –stop
synchronization non sequenced format
Baud Rate (bps) 1200/2400/4800/9600/19200
Data Bits (bit) 7/8
Stop Bits (bit) 1/2
Parity None/Odd/Even
Flow Control None/Hardware
Station Number
Use the same
settings as for the
MICRO/I.
- 0 - 99(DEC)
Refer to the FLEX-PC user’s manual for the details of communication setting.
(*1) Set up the mode switch of Interface Module as below.
RS-2
３２C Mode switch is No.1.
RS-485 Mode switch is No.3.