Hardware manual

Chapter2 Connection to a PLC
2-288
15.4.4 Ethernet Unit on DirectLOGIC
Set following Items in Project Settings Dialog.
Item Setting
IP Address ( for HG ) Set the IP Address for MICRO/I.
(Set the Item in Communication Interface tab.)
Subnet Mask Set the Subnet Mask for MICRO/I.
(Set the Item in Communication Interface tab.)
Default Gateway Set the Default Gateway for MICRO/I.
(Set the Item in Communication Interface tab.)
IP Address (Ethernet Unit ) Set the IP Address for Ethernet Unit.
(Set the Item in Host I/F network tab.)
Port Number (Ethernet Unit ) Set the Port Number for Ethernet Unit.
(Set the Item in Host I/F network tab.)