Hardware manual

Chapter2 Connection to a PLC
2-260
13.3 Connection Diagram
The connector types given in the Connection Diagrams are for the unit and not for the cable.
For details regarding wiring, refer to "3 Important Points Regarding Wiring" in Chapter 1.
Connection Diagram 13-1: FP0, FPΣ-MICRO/I
PLC(RS-232C) HG1F/2F/2S/3F/4F(RS-232C)
Pin No.
Pin No.
Name Name
HG1F
Connector
HG2F/
3F/4F
HG2S
FG 1 1 1
1 SG SD 2 2 30
2 SD RD 3 3 32
3 RD RS 9 4 34
4 - CS 6 5 36
5 +5V NC -
６
-
SG 7 7 29
NC - 8 -
ER - 20 -
D-sub, 9P connector socket type (HG1F)
D-sub, 25P connector socket type (HG2F/3F/4F)
D-sub, 37P connector plug type (HG2S)
Mini DIN 5P socket type
Shield Wire
Connection Diagram 13-2: FP1 (RS232C Port)-MICRO/I
PLC(RS-232C) HG1F/2F/2S/3F/4F(RS-232C)
Pin No.
Pin No.
Name Name
HG1F
Connector
HG2F/
3F/4F
HG2S
1 FG FG 1 1 1
2 SD SD 2 2 30
3 RD RD 3 3 32
4 RS RS 9 4 34
5 CS CS 6 5 36
6 DR NC -
６
-
7 SG SG 7 7 29
8 CD NC - 8 -
9 ER ER - 20 -
D-sub, 9P connector socket type (HG1F)
D-sub, 25P connector socket type (HG2F/3F/4F)
D-sub, 37P connector plug type (HG2S)
D-sub, 9P connector socket type
Shield Wire