Hardware manual

12 Modbus
2-237
Chap.2
12.4 Environment Settings
12.4.1 Twido
Items Details
Serial Interface RS-232C/RS485-2wire
Slave Address 1 – 247(DEC)
Baud Rate (bps) 1200/2400/4800/9600/19200/38400
Data Bits (bit) 7,8
Parity None, Even, Odd
Stop Bits (bit) 1, 2
Flow Control ER
12.4.2 Momentum (MODBUS/TCP Client)
Items Items Details
Serial Interface -- *1
Slave Address -- *1
Baud Rate (bps) -- *1
Data Bits (bit) -- *1
Parity -- *1
Stop Bits (bit) -- *1
unit ID 1 – 247(DEC)
Destination Address *3
IPv4 Typed IP address
Port Number *3
The same setting as
MICRO/I
0 to 32767 *2
*1) These settings will be ignored since it is using the Ethernet port.
*2) If "0" is set, this driver will set "502" (the number of MODBUS/TCP default port)
automatically.
*3) Destination Address and Port Number cannot be changed from the system menu of
MICRO/I. Please change it using WindO/I-NV2 software
*Set unit ID of MICRO/I by the decimal number.