Hardware manual

Chapter2 Connection to a PLC
2-232
12.2.5 Momentum (MODUBS/TCP Client)
HG3F/4F
Ethernet
10BASE-T
171CCC9602
- Use the direct connection with the cross cable or the hub if you use the Ethernet
connection.
- Please avoid using for the long distance communication because this driver may be used
in the control network in the same factory only.
12.2.6 1: N Communication-TWDL CAA16DRF/TWDLCAA24DRF
+TWDNAC485D (Communication board)
The 1: N communication can be established by using the following connection.
TWDLCAA16DRF/TWDLCAA24DRF+TWDNAC485D (Communication board)
RS-485
Connection Diagram 12-
2
HG2F/2S/3F/4F
PLC2 PLC3
PLCn
PLC1
…