Hardware manual

Chapter2 Connection to a PLC
2-214
11.2 System Configuration
The following document explains the connection of GE Fanuc PLCs to MICRO/I screens.
11.2.1 Series 90-30 ( Using Communication Coprocessor Module(CMM) )
RS-232C
Connection Diagram 11-1
Series 90-30
IC693CMM311
MICRO/I
RS-485(422)-4 wires
Connection Diagram 11-2
11.2.2 Series 90-30,VersaMax Micro ( Using CPU Serial Port )
Series 90-30
VersaMax Micro (23,28point)
MICRO/I
RS-485(422)-4 wires
Connection Diagram 11-3
Connects to Serial port on Series 90-30 PLC Power Supply.
Connects to Serial port 2 on VersaMax Micro PLC.
11.2.3 VersaMax Micro/Nano ( Using Serial Port 1)
VersaMax Micro / Nano
MICRO/I
RS-232C
Connection Diagram 11-4
Connects to Serial port 1(RS-232C) on VersaMax Micro/Nano PLC.