Hardware manual

Chapter2 Connection to a PLC
2-188
Word Device
WindO/I-NV2 Device Name
R/W WindO/I-NV2 address
PLC Device Name
PLC address
Timer(Current Value) R TC 0 to TC 777 0000 to 0777
Ext.Counter(Current
Value)
R ETC 1000 to ETC 1777
Timer
(Current Value)
1000 to 1777
Counter(Current Value) R CC 0 to CC 777 0000 to 0777
Ext.Counter(Current
Value)
R ECC 1000 to ECC 1777
Counter
(Current Value)
1000 to 1777
Register(A) R/W RA 0 to RA 1576 0000 to 1576
Ext.Register(A) R/W ERA 2000 to ERA 7576 2000 to 7576
Register(B) R/W RB 0 to RB 1776 b0000 to b1776
Ext.Register(B) R/W ERB 2000 to ERB 3776 b2000 to b3776
Register(09) R/W R09_ 0 to R09_ 776 09000 to 09776
Register(19) R/W R19_ 0 to R19_ 776 19000 to 19776
Register(29) R/W R29_ 0 to R29_ 776 29000 to 29776
Register(39) R/W R39_ 0 to R39_ 776 39000 to 39776
Register(49) R/W R49_ 0 to R49_ 776 49000 to 49776
Register(59) R/W R59_ 0 to R59_ 776 59000 to 59776
Register(69) R/W R69_ 0 to R69_ 776 69000 to 69776
Register(79) R/W R79_ 0 to R79_ 776 79000 to 79776
Register(89) R/W R89_ 0 to R89_ 776 89000 to 89776
Register(99) R/W R99_ 0 to R99_ 776 99000 to 99776
Register(E) R/W RE 0 to RE 1776 E0000 to E1776
Ext.Register(E) R/W ERE 2000 to ERE 7776
Register
E2000 to E7776
System Memory R S 0 to S 2176 System Memory #0000 to #2176
File Register(1) R/W F1_ 0 to F1_ 37776 File Register1 000000 to 037776
File Register(2) R/W F2_ 0 to F2_ 177776 File Register2 000000 to 177776
File Register(3) R/W F3_ 0 to F3_ 177776 File Register3 000000 to 177776
- Set all device using octal.
- Confirm the PLC manuals as device or device address may not use according to PLC.
- R/W specify Read and Write device. R specify Read only device.
- Word device address below “Register (A)” increase +2.(The other device increase +1.)
- Device address of WindO/I NV2 does not displayed as the number of figure used PLC.
Example: if you set to “Register 19005” using WindO/I NV2,
it set to not “R19_ 005” but “R19_5”.