Hardware manual

7.SHARP
2-185
Chap.2
7.4 Environment Settings
7.4.1 Using Computer Link Module
Item Setting
Communication Method RS-485-2 wires
(Set DIP switch SW3-2 to OFF )
RS-485-4 wires
(Set DIP switch SW3-2 to ON )
Communication Mode Computer Link (Command mode)
(Set DIP switch SW0 to ”4”)
Station No.
01 to 17(oct)
(Set DIP switch SW1 / SW2)
Data Bits[bit]
7(fixed)
Baud Rate
[bps]
1200/2400/4800/9600/19200
(Set DIP switch SW4)
Parity Even / Odd
(Set DIP switch SW3-4)
Stop Bits[bit]
Set to the same
setting as the
MICRO/I
2(fixed)