Hardware manual

4 Allen-Bradley PLCs
2-125
Chap.2
4.4.5 ControlLogix, CompactLogix, FlexLogix
Item Setting
Baud Rate (bps) (*1) 1200, 2400, 4800, 9600, 19200
Data Bits (*1) 8 (fixed)
Parity (*1) None or Even
Stop Bits (*1) 1
Flow Control None
Serial Interface RS-232C
Protocol DF1 Point to Point (*3)
Control Line No Handshaking (*3)
Error Detection BCC / CRC
Embedded Response Auto Detect
Duplicate Packet Detect Enable
Station Address (*1)(*2) 0 to 254 (decimal)
(*2) The setting for this item must match the setting on the HG Series unit.
(*3) Select the MICRO/I Node Address using the Station Address (HG) under “Project
Settings” in WindO/I-NV2 software.
(*4) Be certain to select as indicated.