Hardware manual

Chapter 2 Connection to a PLC

2-104

3.4.4 C200H

(Communication Board) Settings

Write the Communication Board setting items for the System Settings Area using a peripheral

tool (such as Procon).

System Settings

Area

Port A Port B

Item Setting

DM6555 DM6550 Standard Setting/Individual Setting

(*1)

Same setting as the

MICRO/I

Mode PLC Link Mode

DM6556 DM6551 Communication parameters for

when the previous item is set to

Individual.

Same setting as the

MICRO/I

DM6557 DM6552 Transmission Delay 0 msec

DM6558 DM6553 Unit No. Same setting as the

MICRO/I

(*1) Standard settings

Baud rate: 9600bps

Data Bits: 7 bits

Stop Bits: 2 bits

Parity: Even

Set DIP switch SW1 to the 4 side (4 line).

Set DIP switch SW2 to ON to turn the termination resistor setting ON.

Refer to the Communication Board manual for details.