User`s manual

9 - 108 9 - 108
MELSEC-Q
9 CONTROL OPERATION INSTRUCTIONS
9.25 Bump-less transfer (S.BUMP)
Usable devices
Internal devices
(System, user)
MELSECNET/H
direct J
\
Setting
data
Bit Word
File
register
Bit Word
Intelligent
function
module
U
\G
Index
register
Zn
Constant
K, H
Other
S1
D1
S2
D2
S.BUMP
S.BUMP
Start contact
S1 D1 S2 D2
[Instruction symbol] [Execution condition]
Set data Description
S1
Input data head device
D1
Block memory head device
S2
Operation constant head device
D2
Local work memory head device
Functions
Brings the output value (BW) closer to the output set value (E1) from the output control value (E2)
at the fixed rate when the operation mode is switched from the manual mode to the automatic
mode.
Brings the output value (BW) closer to the output set value (E1) with a primary delay when the
output value (BW) falls within the range specified as the delay zone (a) relative to the output set
value (E1).