Specifications

Q/QnA Serial Communication Driver
GP-Pro EX Device/PLC Connection Manual
37
 Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device
you want to set from the displayed list, and touch [Device].
Setup Items Setup Description
Device/PLC Name
Select the External Device for device setting. Device name is a title of External Device set
with GP-Pro EX.(Initial value [PLC1])
Station No.
Use an integer from 0 to 31 to enter the station number of the External Device directly
connected to the Display.
Q Series C24 I/F
Select “ON” and “OFF” respectively when the Q Series C24 I/F unit is used and when the
Q Series C24 I/F unit is not used.
If “ON” is selected when the Q Series C24 I/F unit is not used, the error may be displayed
on the External Device.
Network No.
Set when you communicate via network. Use an integer from 0 to 239 to enter network No.
of the External Device to communicate. If you do not communicate via network, enter 0.
PC No.
Set when you communicate via network. Use an integer from 0 to 64 or 125 to 126 to enter
PC No. of the External Device to communicate. If you do not communicate via network,
enter 255.
Request destination
module I/O No.
Set when you communicate via network. Use an integer from 0 to 511 to enter I/O No. of
the External Device to communicate. If you do not communicate via network, enter 1023.
Request destination
module Station No.
Set when you communicate via network. Use an integer from 0 to 31 to enter station No. of
the External Device to communicate. If you do not communicate via network, enter 0.
• Do not set the duplicate device settings in multiple devices. Illegal address may be read.