Specifications

Q/QnA Serial Communication Driver

GP-Pro EX Device/PLC Connection Manual

4.2 Communication Settings in Off-line Mode

 Communication Settings

To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in off-line mode. Touch the

External Device you want to set from the displayed list.

• Refer to the Maintenance/Troubleshooting manual for information on how to enter off-line mode

or about the operation.

Cf. Maintenance/Troubleshooting Manual "2.2 Off-line Mode"

• The number of the setup items to be displayed for 1 page in the off-line mode depends on the

Display in use. Please refer to the Reference manual for details.

Setup Items Setup Description

SIO Type

Select the SIO type to communicate with the External Device.

To make the communication settings correctly, confirm the serial interface specifications of

Display unit for [SIO Type].

We cannot guarantee the operation if a communication type that the serial interface does

not support is specified.

For details concerning the serial interface specifications, refer to the manual for Display

unit.

Speed Select speed between the External Device and the Display.

Data Length Select data length.

Parity Select how to check parity.

Stop Bit Select stop bit length.

Flow Control

Select the communication control method to prevent overflow of transmission and

reception data.

continued to next page