Specifications

Q/QnA Serial Communication Driver
GP-Pro EX Device/PLC Connection Manual
34
 Device Setting
To display the setting screen, click ([Setting]) of External Device you want to set from [Device-Specific
Settings] of [Device/PLC Settings].
When [Allowable No. of Device/PLCs] is multiple, click from [Device-Specific Settings] of [Device/PLC
Settings] to add another External Device.
Setup Items Setup Description
Station No.
Use an integer from 0 to 31 to enter the station number of the External Device directly
connected to the Display.
Connected to Q Series
C24 I/F Module
Check this checkbox only when the Q Series C24 I/F unit is used.
If this is checked when the Q Series C24 I/F unit is not used, the error may be displayed on
the External Device.
Network No.
Set when you communicate via network. Use an integer from 0 to 239 to enter network No.
of the External Device to communicate. If you do not communicate via network, enter 0.
PC No.
Set when you communicate via network. Use an integer from 0 to 64 or 125 to 126 to enter
PC No. of the External Device to communicate. If you do not communicate via network,
enter 255.
Request destination
module I/O No.
Set when you communicate via network. Use an integer from 0 to 511 to enter I/O No. of
the External Device to communicate. If you do not communicate via network, enter 1023.
Request destination
module Station No.
Set when you communicate via network. Use an integer from 0 to 31 to enter station No. of
the External Device to communicate. If you do not communicate via network, enter 0.