Specifications

Q/QnA Serial Communication Driver
GP-Pro EX Device/PLC Connection Manual
10
2 Selection of External Device
Select the External Device to be connected to the Display.
Setup Items Setup Description
Number of Devices/
PLCs
Enter an integer from 1 to 4 for the number of series to set.
Manufacturer
Select the manufacturer of the External Device to be connected. Select "Mitsubishi Electric
Corporation".
Series
Select a model (series) of the External Device to be connected and connection method.
Select "Q/QnA Serial Communication".
Check the External Device which can be connected in "Q/QnA Serial Communication" in
system configuration.
)"1 System Configuration" (page 3)
Port Select the Display port to be connected to the External Device.
Use System Area
Check this option to synchronize the system data area of the Display and the device
(memory) of the External Device. When synchronized, you can use the ladder program of
the External Device to switch the display or display the window on the Display.
Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (Direct Access
Method)"
This can be also set with GP-Pro EX or in the Display's off-line mode.
Cf. GP-Pro EX Reference Manual "5.17.6 [System Settings] Setting Guide,
[Display Unit] Settings Guide, System Area Settings"
Cf. Maintenance/Troubleshooting Manual "2.15.1 Settings common to all
Display models, [Main Unit Settings] Settings Guide, System Area Settings"