User`s manual

96
(4) Setting and monitoring by GX Configurator-SC for use of the callback function
(a) Setting, monitoring / test items
Carry out setting, monitoring and testing of the callback function using the following GX Configurator-SC
screen.
• Setting items through the "Modem function system setting" screen
This shows the callback function setting items.
See Page 105, Section 3.3.6 for the modem function setting items, including the following items.
●: Must be set, : Set as necessary
• Monitoring / Testing through the "modem function monitor / test" screen
This shows the callback function monitoring and testing.
See Page 105, Section 3.3.6 for monitoring and testing of the modem function, including the following items.
Setting item Setting value
Setting
possible /
impossible
Description
GX Developer connection designation Connect ●
Be sure so specify "Connect" when using the callback
function.
Callback function designation
Settings 1 to 6
( Page 97,
Section 3.3.4 (4)
(b))
● Select according to the callback operation.
Callback denial notification accumulated count
designation
0 to 65535 
Specify the accumulated count value informed to the
user.
Data No. for Callback designation 1 to 10 BB8H to 801FH ●
Specify the connection data No. See Page 139,
Section 3.4.4 for setting values.
Callback function monitoring / test items Buffer memory address
Callback permit accumulated count 8944 (22F0H)
Callback denial accumulated count 8945 (22F1H)
Auto (callback) connection permit accumulated count 8946 (22F2H)
Auto (callback) connection denial accumulated count 8947 (22F3H)
Accumulated count of callback receive procedure cancel 8948 (22F4H)