User`s manual
94
(c) If you are making a line connection to the GX Developer by the following connection
system, select "callback reception waiting" as the connection system for GX
Developer that the Q Series C24 is reconnecting to (callback) and make the
connection.
• Callback request (during fixed/during designated number)
In the case of line connections with "Callback request (during designated number)" as the connection
system.
(d) If callback processing was not executed normally, an error message screen is
displayed on the GX Developer side. Perform the processing operation
(reconnection operation, etc.) corresponding to the displayed message.
The operating state on the Q Series C24 side can be confirmed by the following items in the GX Configurator-
SC monitor/test screen.
GX Configurator-SC Monitor / test screen Monitor item Buffer memory address Reference
XY monitor/test
X10: Modem initialization
completion
Page 102, Section 3.3.5
X12: Connection in progress
Modem function monitor/test Modem function sequence status 222H Page 105, Section 3.3.6
Modem
Modem
Callback request
(during designated number)
GX Developer
Telephone No. 1)
Modem
Setting of callback function
designation settings by the
GX Configurator-SC
Select "Callback request (during designation number)",
input the telephone No. 2) and make the line connection.
Callback data No. 1 Telephone No. 1)
Callback data No. 2
Callback data No. 3
Callback data No. 10
Telephone No. 2)
Telephone No. 3)
Telephone No. 10)
Registration in the Q Series C24
Line connection
Select "Callback reception waiting"
and make the line connection.
"Callback
reception waiting"
GX Developer
Telephone No. 2)
to to