User`s manual

389
CHAPTER 17 DEDICATED INSTRUCTIONS
17
17.5 G(P).GETE
17.5 G(P).GETE
This instruction reads out a user frame.
17.5.1 Setting data
The file registers of each of the local device and the program cannot be used as the setting data.
Setting
data
Applicable device
Internal device
File register
Link direct device
J\
Intelligent function
module device
U\G
Index register Zn Constant Others
Bit Word Bit Word
(S1)  
(S2)  
(D)  
Setting data Description Set by Data type
Un
Start I/O signal of the module
(00 to FE: The 2 upper digits of an input/output signal expressed in 3-digit.)
User BIN-16 bit
(S1) Head number of the devices that store control data User, System
Device name
(S2) Head number of the devices storing the registered data that has been read
System
(D)
Head bit device number of the local station that turns ON for one scan upon instruction completion.
(D)+1 also turns on if the execution completes abnormally.
Bit
G.GETE
GP.GETE
G.GETE
(S1) (S2)
Un
GP.GETE
(D)
(S1) (S2)Un (D)
Command
[Instruction
code]
Command
[Executing
condition]