User`s manual

384
17.4 ZP.CSET (Initial Settings)
With this instruction, the unit of transmission/reception data (word/byte) and data communication areas can be set.
*1 If the host station is a Basic model QCPU (function version B or later), Universal model QCPU, or LCPU, " " (double
quotation) of the first argument can be omitted.
17.4.1 Setting data
The file registers of each of the local device and the program cannot be used as the setting data.
Setting
data
Applicable device
Internal device
File register
Link direct device
J\
Intelligent function
module device
U\G
Index register Zn
Constan
t K, H
Others
Bit Word Bit Word
(S1)   
(S2)  
(D1)  
(D2)  
Setting data Description Set by Data type
"Un"/Un
Start I/O signal of the module
(00 to FE: The 2 upper digits of an input/output signal expressed in 3-digit.)
User
String/BIN-16
bit
(S1)
Channel No. for sending the monitoring result
1: Channel 1 (CH1 side)
2: Channel 2 (CH2 side)
User BIN-16 bit
(S2) Head number of the devices that store control data User, System Device name
(D1) Dummy  Device name
(D2)
Head bit device number of the local station that turns ON for one scan upon instruction
completion.
(D2)+1 also turns ON if the instruction execution completes abnormally.
System Bit
ZP.CSET
*1
"Un" (S1) (S2) (D1)ZP.CSET (D2)
[Executing
condition]
[Instruction
code]
[Instruction format]