User`s manual

375
CHAPTER 17 DEDICATED INSTRUCTIONS
17
17.3 ZP.CSET (Programmable Controller CPU Monitoring Register/Cancel)
17.3 ZP.CSET (Programmable Controller CPU Monitoring
Register/Cancel)
With this instruction, monitoring of the programmable controller CPU can be registered or cancelled.
*1 If the host station is a Basic model QCPU (function version B or later), Universal model QCPU, or LCPU, " " (double
quotation) of the first argument can be omitted.
17.3.1 Setting data
The file registers of each of the local device and the program cannot be used as the setting data.
Setting
data
Applicable device
Internal device
File register
Link direct device
J\
Intelligent function
module device
U\G
Index register
Zn
Constant
K, H
Others
Bit Word Bit Word
(S1)   
(S2)  
(D1)  
(D2)  
Setting data Description Set by Data type
"Un"/Un
Start I/O signal of the module
(00 to FE: The 2 upper digits of an input/output signal expressed in 3-digit.)
User String/BIN-16 bit
(S1)
Channel No. for sending the monitoring result
1: Channel 1 (CH1 side)
2: Channel 2 (CH2 side)
User BIN-16 bit
(S2) Head number of the devices that store control data User, System Device name
(D1) Dummy  Device name
(D2)
Head bit device number of the local station that turns ON for one scan upon instruction
completion.
(D2)+1 also turns ON if the instruction execution completes abnormally.
System Bit
ZP.CSET
*1
"Un" (S1) (S2) (D1)
ZP.CSET
(D2)
[Instruction
code]
[Instruction format][Executing
condition]