User`s manual

362
16.2 Communication Data Monitoring Function Settings
Settings for the communication data monitoring function can be configured on the "Transmission control and other
system setting" screen of GX Configurator-SC or in the sequence program.
(1) GX Configurator-SC setting for the communication data monitoring function
The setting items for the communication data monitoring function are listed below.
See Page 363, Section 16.2 (2) in this section for setting details.
[Transmission control and other system setting screen]
[Setting items]
Setting items Setting values Item details
Send/Receive data monitoring designation
No monitoring/Monitor stop,
Monitor start
Select "monitor start" for constant monitoring.
Action for buffer full Continue/Stop Select "stop" to stop monitoring when the monitor data area is full.
Stop by Timer 0 error Continue/Stop Select "stop" to stop monitoring when a timer 0 error occurs.
Monitor buffer head address 0400H to 1AFDH, 2600H to 3FFDH
Enter a value to change the monitor buffer address.
(Default address: 2600H/3300H)
Monitor buffer size 0003H to 1A00H
Enter a value the monitor buffer size.
(Default: 0D00H)