User`s manual

347
CHAPTER 15 SWITCHING THE MODE AFTER STARTING
15
15.1 Mode Switching Operation and Contents that can be Changed
15.1 Mode Switching Operation and Contents that can be
Changed
This section describes the set contents that can be changed with mode switching and the operation of Q series C24
after mode switching.
15.1.1 Settings that can be changed with mode switching
The following describes the settings that can be changed with mode switching.
(1) Switching the communication protocol
(a) The communication protocol setting of each interface can be switched.
(b) The communication protocol after the mode switching is specified by the switching
mode No. designation area of the buffer memory (address: 90H, 130H).
(2) Changing the transmission specifications
(a) The transmission setting of each interface can be switched.
(b) The transmission setting after the mode switching is specified by the transmission
specification after switching designation area of the buffer memory (address: 91H,
131H).
Mode switching allows the user to change the settings corresponding to communication protocol and transmission switch
settings of the GX developer.