User`s manual

323

CHAPTER 13 COMMUNICATING WITH ASCII CODE (ASCII-BIN CONVERSION)

13.4 Example of Data Communication Using the Non Procedure Protocol

13.4 Example of Data Communication Using the Non

Procedure Protocol

This section shows examples of data communication using the non procedure protocol when the following

settings/registrations are made.

(1) Settings via GX Developer

Perform the following settings on the "Intelligent function module switch setting" screen.

(2) Settings via GX Configurator-SC

setting," and "Transmission user frame No. designation system setting" screens.

For items other than those listed below, the default values are used.

Setting item Setting value Remarks

Switch 1

CH1 Transmission setting

Set according to the external device 

CH1 Communication rate setting

Switch 2 CH1 Communication protocol setting 0006H Nonprocedural protocol

Switch 3

CH2 Transmission setting

0000H

Not usedCH2 Communication rate setting

Switch 4 CH2 Communication protocol setting 0000H

Switch 5 Station No. setting 0000H Station number of the Q series C24

Registration screen Setting item Setting value

"Non procedure system setting" screen

Received data count designation 0003H

Receive complete code designation 0009H